电气参数 | ||||||||||||
| 型号HS-PV | 1KW | 2KW | 3KW | 4KW | 5KW | 6KW | 8KW | 10KW | 12KW | ||
逆变器输出 | 额定功率 | 1KW | 2KW | 3KW | 4KW | 5KW | 6KW | 8.0KW | 10KW | 12KW | ||
峰值功率(20秒) | 3KW | 6KW | 9KW | 12KW | 15KW | 18KW | 24.0KW | 30KW | 36KW | |||
输出电压波形 | 纯正弦波(市电或发电机) | |||||||||||
额定效率 | >88%(Peak) | |||||||||||
在线模式效率 | >95% | |||||||||||
功率因数 | 0.9-1.0 | |||||||||||
额定输出电压 RMB | 100-110-120Vac / 220-230-240Vac | |||||||||||
输出频率 | 50Hz ± 0.3Hz/60Hz ± 0.3Hz | |||||||||||
短路保护 | 有，短路1秒后 | |||||||||||
典型切换时间 | 10ms(***大) | |||||||||||
总谐波失真 | < 10% | |||||||||||
直流输入 | 额定输入电压 | 12.0Vdc / 24.0Vdc / 48.0Vdc | ||||||||||
***低启动电压 | 10.0Vdc / 10.5Vdc for 12Vdc Mode | *2 for 24Vdc, *4 for 48Vdc; | ||||||||||
启动电压 | 10-15.7Vdc for 12Vdc Mode | *2 for 24Vdc, *4 for 48Vdc; | ||||||||||
过充保护关断点 | 15.7Vdc for 12Vdc Mode | |||||||||||
MPPT太阳能控制器 | ||||
额定电压 | 12Vdc | 24Vdc | 48Vdc | |
额定充电电流 | 40/60Amp | 40/60Amp | ||
包括直流负载 | ||||
直流负载 | 15Amp | |||
输入电压范围 | 18～150VVdc | 35～150VVdc | 60～150VVdc | |
***大太阳能开路电压 | 150Vdc | 150Vdc | 150Vdc | |
过载保护（直流负载） | 2.0 * I(额定)>5s；1.5 * I(额定) >20s | |||
1.25 * I(额定) 温控 | ||||
空载损耗 | At idle < 10mA | |||
快充电压 | 14.6Vdc | 29.2Vdc | 58.4Vdc | |
浮充电压 | 13.4Vdc | 26.8Vdc | 53.6Vdc | |
均衡电压 | 14.0Vdc | 28.0Vdc | 58.0Vdc | |
过充切断 | 14.8Vdc | 29.6Vdc | 59.2Vdc | |
过充恢复 | 13.6Vdc | 27.2Vdc | 54.4Vdc | |
过放切断 | 10.8Vdc | 21.6Vdc | 43.2Vdc | |
过放恢复 | 12.3Vdc | 24.6Vdc | 49.6Vdc | |
温度补偿 | -13.2mV/℃ | -26.4mV/℃ | -52.8mV/℃ | |
铅酸电池设定 | 可调 | |||
NiCad电池设定 | 可调 | |||
低压恢复 | 12.0-14.0Vdc | 24.0-28.0Vdc | 48.0-56.0Vdc | |
低压切断 | 10.5-12.5Vdc | 21.0-25.0Vdc | 42.0-50.0Vdc | |
室温 | 0-40℃ (满载) 40-60℃ (降容) | |||
海拔 | 运行5000m, 非运行16000m | |||
温度补偿 | 可选 | |||
